Preparations and Prerequisites
Labor Resource (People/Skills)
Service Technician x 1
Crane Operator x 1
Technical Data
To select correct lifting devices, stands, and tools, refer to the technical data as detailed throughout the instruction sections.
NOTE
Due to the variation of machine options and components, actual values can differ from data. Data is for reference only.
Machine Technical Data
See machine-specific manuals for weight, dimensions, and other data relevant to bringing the machine to the work area and doing the task.
Component Technical Data
Description | Data | Remarks |
|---|---|---|
Feed holder | 161 kg (355 lb) | Boltec M Includes sensor set and protection |
Feed holder | 85 kg (187 lb) | Cabletec M Includes sensor set and protection |
Feed holder | 357 kg (787 lb) | Cabletec E Includes sensor set and protection |
Feed holder | 227 kg (500 lb) | Cabletec LC Includes sensor set and protection |
Tools
Description | Specification |
|---|---|
Standard mechanic toolkit | |
Torque wrench, calibrated | Capacity up to 563 N⋅m (415 ft⋅lb) |
Tags | As required |
Support Equipment
Description | Specification |
|---|---|
Crane | As required |
Lifting equipment | As required |
Consumables
Description | Specification | Quantity |
|---|---|---|
Not applicable |
Spare Parts
NOTE
To create an order list request for the spare parts, refer to the Spare Parts Catalog for your specific machine model and serial number.
Boltec M
Description | Specification | Quantity |
|---|---|---|
Feed holder | - | 1 |
Screw | Sensor set attachment | 2 |
Spacer | 2 | |
Screw | Attachment plates | 12 |
Washer | 24 | |
Lock nut | 12 | |
Screw | Feed holder | 20 |
Lock nut | 20 |
Cabletec M
Description | Specification | Quantity |
|---|---|---|
Feed holder | - | 1 |
Screw | Sensor set attachment | 2 |
Screw | 4 | |
Screw | Attachment plates | 6 |
Washers | 12 | |
Screw | 6 | |
Bolt | Feed holder | 1 |
Lock nut | 1 | |
O-ring | 2 |
Cabletec E
Description | Specification | Quantity |
|---|---|---|
Feed holder | - | 1 |
Screw | Sensor set attachment | 2 |
Screw | 4 | |
Screw | Sensor bracket | 8 |
Bolt | Shaft | 1 |
Lock nut | 1 | |
Screw | Thrust washer | 2 |
Plain washer | 2 |
Cabletec LC
Description | Specification | Quantity |
|---|---|---|
Feed holder | - | 1 |
Screw | Sensor set attachment | 2 |
Washer | 2 | |
Screw | 4 | |
Washer | 4 | |
Screw | Cover | 2 |
Screw | Cover | 2 |
Bolt | Shaft | 1 |
Suggested Time Required (Standard Planning Hours)
Ref. Section | Description | Planned Time (HH:MM) |
|---|---|---|
5,6,7 | Feed Holder Removal and Installation | 04:30 |
Reference Documentation
The following list of reference material relates to this instruction. Additional specific documentation is referenced at each applicable step.
NOTE
The listed documentation must be available in valid version at the location where the job is being performed.
Manual | Reference |
|---|---|
Safety Manual | Model Specific |
Operation Manual | Model Specific |
Service/Maintenance Manual | Model Specific |
Mining and Rock Excavation Torque Specification | No. 1185028747 |
Spare Parts Catalog | Machine Specific (per serial number) |
Fluids and Lubricating Greases | Model Specific |
Boltec M - SOP - CRI - Drill Steel Support | Document ID: TIS0004875 en-US |
Cabletec M - SOP - CRI - Rod Handling System | Document ID: TIS0005510 en-US |
Cabletec E - SOP - CRI - Rod Handling System | Document ID: TIS0005511 en-US |
Cabletec LC - SOP - CRI - Rod Handling System | Document ID: TIS0005512 en-US |
Cabletec M,E,LC - SOP - CRI - Look-out Cylinder | Document ID: TIS0005150 en-US |
Boltec M, Cabletec M,E,LC - SOP - CRI - Feed Extension Cylinder | Document ID: TIS0005104 en-US |
Boltec M - SOP - CRI - Feed Beam | Document ID: TIS0004857 en-US |
Cabletec M - SOP - CRI - Feed Beam | Document ID: TIS0005103 en-US |
Cabletec E,LC - SOP - CRI - Feed Beam | Document ID: TIS0005660 en-US |