Procedure Report
Use the report to document all of the installation specifications such as torques and pressures.
The report must be completed, signed, and stored to use as a record, if settings or installation conditions requires verification. Include photos where necessary.
Machine / Component Details
Service Order Number: |
Machine Model: |
Machine Number: |
Machine Serial Number: |
Machine Hours: |
Component Model: |
Component Serial Number: |
Technician Name: |
Technician Signature: |
Task Specifications
Use this section to record installation specifications such as torques and pressures.
Ref. Step | Installation Step Description | Value |
|---|---|---|
Lifting and Installation | ||
iiid | Attachment plate screws (Boltec M and Cabletec M) | |
6a | Feed holder screws (Boltec M) | |
6b | Feed holder screws (Cabletec M) | |
7c | Thrust washer screws (Cabletec E) | |
7f | Shaft bolt (Cabletec E) | |
7h | Sensor bracket screw (Cabletec E) | |
8b | Shaft bolt (Cabletec LC) | |
8d | Cover screw (Cabletec LC) | |
Preparation of the Component | ||
3a | Sensor set attachment screws (Boltec M) | |
3b | Sensor set attachment screws (Cabletec M and Cabletec E) | |
3c | Protector attachment screws (Cabletec M and Cabletec E) | |
3d | Sensor set and protector attachment screws (Cabletec LC) | |
3e | Protector attachment screws (Cabletec LC) |