Procedure Report
Use the report to document all of the installation specifications such as torques and pressures.
The report must be completed, signed, and stored to use as a record, if settings or installation conditions requires verification. Include photos where necessary.
Machine / Component Details
Service Order Number: |
Machine Model: |
Machine Number: |
Machine Serial Number: |
Machine Hours: |
Component Model: |
Component Serial Number: |
Technician Name: |
Technician Signature: |
Task Specifications
Use this section to record installation specifications such as torques and pressures.
Ref. Step | Installation Step Description | |
|---|---|---|
Lifting and Installation | ||
12 | Rear axle screws | |
Preparation of the Component | ||
1d | Receiver tank screws | |
4 | Hood cover screws | |
7 | Cover plate screws | |
viii c | Cover plate (camera kit) screws | |
viii f | Camera kit screws | |
13a | Hood screws (Boltec M, Boomer M1D, Simba M6C, Simba E7C, Cabletec E and Cabletec M) | |
13b | Hood screws (Boltec EC and Boltec E) | |
13c | Hood screws (Boomer E2C) | |
13d | Hood screws (Cabletec LC) | |
xvi a | Plate screws (Boltec M, Boomer M1D,Simba M6C, Simba E7C and Cabletec M) | |
xvi b | Plate screws (Cabletec E, Boltec EC and Boltec E) | |
xvi c | Plate screws (Boomer E2C) | |
xix c | Air filter set screws | |
24 | Driveline screws |